Features: - Input Voltage: 220VAC - Output Voltage: 180VDC - Working Principle: Electronic speed controller designed compatible direct motor start-up; integrates with motor, miniature gear reducer, and speed sensor as a mechatronic unit. - compatibleward/Reverse Control: Motor rotation direction (compatibleward or reverse) is controlled by connecting to M+ or M− terminals. - Mechanical Percompatiblemance: Robust construction with wide speed adjustment range. - Installation: Simple panel-mount installation using screws. How to Use: 1. Becompatiblee powering on, set the external speed potentiometer to zero to prevent inrush current that may damage the controller. 2. Terminal identification: - AC input terminals: Connect to 220VAC supply. - M+/M− terminals: Connect to motor leads. - P1/P2 terminals: Emergency stop function — shorting P1 and P2 stops motor operation. 3. Built-in fuse provides overcurrent and short-circuit protection. Replace with identical specification fuse if blown. Panel-mounted switches control motor start/stop only — they do not interrupt main power supply. Specifications: - Item Type: Motor Speed Controller - Housing Material: ABS - Input: 220VAC - Output: 180VDC - Dimensions (L×W×H): Approx. 100 × 60 × 114 mm (3.9 × 2.4 × 4.5 in) - Panel Cutout Size: Approx. 81 × 53 mm (3.2 × 2.1 in) - Mounting Method: Panel screw mounting - Power Rating: 250W / 400W / 500W - Package Includes: 1 × Motor Speed Controller Note: Slight dimensional variations (±1–2 cm) may occur due to manual measurement. Color appearance may vary slightly depending on monitor settings.