Applications: Vehicle adjustable power supply; connect 12V input, and the output can be adjusted between 14-35V (step-up only), however, the output voltage cannot be lower than the input voltage. Boost charger: Use a 12V input to charge batteries with higher voltage, such as a 24V battery. Power your electronic devices by setting the required output voltage, provided the current does not exceed the rated limit. Ideal for system-level power needs: when your project requires an input of 10-18V and your system board needs approximately 24V, this DC-DC boost module provides sufficient power without the need for additional components. Easy to use and efficient, it allows direct operation without complex debugging. Input voltage: DC 10-32V Output voltage: DC 12-35V (adjustable) Output current: up to 6A Input current: up to 10A Maximum output power: 100W (natural cooling), up to 150W with active cooling Conversion efficiency: up to 94% (tested at 19V input, 2.5A, with 16V output – reference value) Output ripple: ≤2% (maximum) Operating temperature: -40°C to +85°C (industrial grade); derate above 40°C ambient for reliable performance Full charge temperature: up to 45°C No-load current: typically 25mA Voltage regulation: ±0.5% Load regulation: ±0.5% Dynamic response speed: 200μS with ±5% deviation Short circuit protection: Not included; no internal fuse or protection circuit on input side Input reverse polarity protection: Not included; user must implement external protection diode or wiring precautions Dimensions: 65 x 23 x 56.3mm Color: As shown in images Material: PC + metal Package Contents: 2 x DC-DC converter Note: The package includes only the items listed above. Other accessories are not included. Lighting and display differences may cause slight variations in color representation between the image and the actual product. Measurement tolerance: ±1-3cm.