DC-DC Boost Converter Step Up Power Supply Module 10-60V To 12-90V Adjustable Voltage Charger

1. Using materials, the quality is guaranteed2. Fan blade heat dissipation is adopted, the heat dissipation effect is very good, and the output power is higher3. The temperature-controlled fan adopts hydraulic bearing fan, which has achieved a good balance in noise and heat dissipation. When the load is light, the fan does not turn. When the load temperature reaches about 60 degrees, the fan automatically rotates. Can effectively reduce noise and prolong service life4. The main power tube insulation board is made of alumina, and the thermal conductivity is 10 times that of ordinary insulation pads5. Oversized ferrosilicon aluminum magnetic ring, using four 1.2 pure copper enameled wires, low calorific value and high efficiency.With constant current function, it can be used for car battery boost, battery charging, etc.Output power: 1800WInput voltage range: 10V-60VOutput voltage range: 12V-90VInput current: 40AOutput current: 22AConversion efficiency: 48V to 60V 8A (98.1 %)48V to 72V 8A (98.1%)48V 84V 8A (97.6%)Charge Regulation: 10% to 50% charge (72V output)Temperature coefficient: 50% loadRipple and Noise: 20MHz bandwidth (48V-72V 4A) 100mVp-pSwitching frequency: VIN = 48V VO = 72V 4A (110khz)No-load current: VIN = 48V VO = 72V (18mA)Input reverse protection: yesStorage humidity: 95%Operating temperature: -20 65 °CStorage temperature: -40 125 °COperating Temperature Rise: 48V to 60V 5A (45 °C)Overheating Protection: 60°CWiring method: input, output (solderless, terminal block).Cooling method: strong air cooling/Module name: 1200W boost constant current moduleModule nature: non isolated boost module (b0ost)Input voltage: dc10-60vInput current: 20A (max) (when the input voltage of fan cooling is 12-24V, the input current can reach 25a)Static working current: 15mA (when 12V rises to 20V, the higher the output voltage, the higher the static current will increase)Output voltage: 12-83v continuously adjustable (