1. Remove the front fork.2. Slide the seal.3. Check if the column is contaminated4. Apply fork oil to the inner surface of the new seal.5. Slide the seal to the top of the column, and then slide it down onto the slider.6. Loosen the three head screws and reduce or increase the diameter to adjust the plastic fitting of the tool to match the size of the seal.7. Press the adapter on the seal and slide tool up and down several until the seal is pushed into the slider.Type: Wrench & Removal ToolType: Valve and oil seal removal toolcolor:As shownMaterial:Stainless steelPackage Contents:1 set x Motorcycle oil seal installation toolOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.