1. for debugging detector, for Pico RP2040 USB debugging downloader<br> 2. The Debug Probe is a cost-effective, all-in-one USB to serial debug and UART bridge. The required hardware and are provided to support "plug and play" debugging of Pico and other microcontroller and microprocessor based platforms.<br> 3. for Debug Probe provides processor serial debugging interface (by default, this is the ARM serial wire debugging interface) and industry standard UART interface. Both interfaces use a 3-pin debug connector, as specified in the 3-pin Debug Interface Specification.<br> 4. The for Debug Probe is a USB device that provides a UART serial port and a standard Arm serial wire debug (SWD) interface.<br> 5. The probe is designed for simple, solderless, plug-and-play debugging.<br> Type: Debug Probe<br> : debugging detectors<br> Specifications: PICO Debugger<br> Function:<br> 1. USB to ARM Serial Wire Debug (SWD) port<br> 2. USB to UART Bridge<br> 3. Compatible with CMSIS- standard<br> 4. Use with OpenOCD and other tools that support CMSIS-<br> 5. Open source, easy-to-upgrade firmware<br> Note:<br> Different Batches May Have Differences In Product Appearance, Color, And Printed Characters, Which Will Not Affect The Use<br> Colour:As Shown<br> Material:PCB+Plastic<br> Package Contents:<br> 1 x for Debugging Probe<br> 1 x Plastic Box<br> 1 x Data Cable<br> 1 x 3-Pin Debugging To 3-Pin Cable<br> 1 x 3-Pin Debugging To 0.1-Inch Header (Female) Cable<br> 1 x 3-Pin Debugging To 0.1 Inch Head (Male) Cable<br> Only the above package content, other products are not included.<br> Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.