TFT LCD Screen for Galaxy J3 (2016) J320FN, J320F, J320G, J320M, J320A, J320V, J320P with Digitizer Full Assembly (Black) Before Installation Notes 1. Test before installation. When testing, do not remove any protective film or tags. Pay attention to static electricity. Before attempting any repair, ground yourself using an ESD (electrostatic discharge) strap to prevent damage to electronic components. Wear eye protection and handle with care to avoid injury from glass splinters. 2. Screen replacement is a fragile product. Testing before installation is strongly recommended. Simulate testing by disassembling the phone, connecting the motherboard, LCD or screen, o cable, and the new replacement, then power on to complete the test. If the test is successful, proceed with installation. If the screen does not display, contact the seller immediately. Do not force installation. Responsibility is not assumed once the screen is installed. 3. Do not over-bend the LCD cable. Bending beyond 90 degrees may cause a black display. Product Information 1. Replacement LCD display and touch screen digitizer assembly (TFT Material) for Galaxy J3 (2016) models J320FN, J320F, J320G, J320M, J320A, J320V, J320P. 2. Replace your broken or non-functional screen with a new one. 3. Restore your device to a like-new appearance. 4. Full compatibility and functionality. 5. Each unit is tested and in good condition prior to shipping. 6. Professional installation is highly recommended. No responsibility is assumed after installation.