Feature:1. The AC input range can be selected by the switch, convenient to use and with good performance.2. Can withstand 5G vibration test, and there is an LED indicator for booting, which is very convenient.3. After 100% full load aging test, the maximum working temperature can get 70.4. Great workmanship, products have high efficiency, long life and high reliability.5. Strict quality control and quality assurance, high safety factor, can be used with peace of mind.Specification:Item Type: BERM Switching Power SupplyMaterial: Aluminum, PCBPurpose: Power supply functionOutput Value:ModelLRS-200-12LRS-200-24DC Voltage12V24VRated Current17A8.8ACurrent Range0~17A0~8.8ARated Power200W200WRipple and Noise (maximum)120mVp-p150mVp-pVoltage Adjustment Range10.2 ~ 13.8V21.6 ~28.8VWithstand Voltage1.0%1.0%Line Adjustment0.5%0.5%Load Regulation0.5%0.5%Setting, Rise Time1300ms, 50ms/ 230VAC1300ms, 50ms/ 115VAC (full load)Holding Time (typical Value)16ms/ 230VAC12ms/ 115VAC (full load)Input Value:ModelLRS-200-12LRS-200-24Voltage Range90~132VAC/ 180~264VDC (adjusted by switch)240 ~ 370VDC (connected to 230VAC)Frequency Range47 ~63HzEfficiency (typical value)87.50%89.50%AC Current (typical value)4A/ 115VAC2.2A/ 230VACInrush Current (typical value)60A / 230VAC60A/230VACLeakage Current<2mA 240VACProtection: Overload: 110~140 of rated output power; protection type: Hiccup mode, automatic recovery after the fault condition is eliminatedSurroundings: Working Temperature: -20~+70Working Humidity: 20~90%RH non-condensingStorage Temperature and Humidity: -40~+85, 10~95%RHTemperature Coefficient: 0.03% (0 ~ 50)Vibration: 10 ~ 500Hz, 5G 10 minutes/1 cycle, 60 minutes each along the X, Y, and Z axes.Safety and EMC: Safety Standard: EN60950-1, approved.Withstand Voltage: I/P-0/P: 1.5KVAC I/P-FG: 1.5KVAC 0/P-FG: 0.5KVACIsolation Resistance: I/P-O/P, I/P-FG, 0/P-FG: 100M Ohms / 500VDC/25/ 70% RHHow to Use: Can be used when it is connected to the current wire, L is connected to the live wire, N is connected to the neutral wire, +V is connected to the output positive pole, -V is connected to the output negative pole, the white regulator can realize the fine adjustment of the voltage, and the ground wire identification is the ground wire interface..Package List:1 x Power 4 x Bracket1 x Screw Pack