1. The sound and image of the baby end are transmitted to the display end in real time, and the adult can monitor the baby's condition in real time. When the intercom button on the display end is pressed, the baby The child sends out the language, etc., 2. Breastfeeding reminder function: When it is set to 0:30H, when 30 minutes backward from the current time, there will be an image and sound alarm on the display to remind you that you are busy. For adults, its time for the baby to breastfeed, and so on. 3. The display terminal can choose 8 lullabies to play on the baby terminal. 4. Set the time according to different time zones. 5. Set the display temperature according to personal habits: / 6. You can choose the baby terminal to be displayed. If two baby terminals are connected at the same time, the display can be switched automatically or manually. 7. VOX mode: The default is off. When the ambient sound of the baby terminal is lower than the set value, the display screen of the display terminal will turn off after 30 seconds, and the environment where the baby terminal is located. When the sound is greater than the set value, the display screen on the display end can be selected according to the environment: HIGH/MED/LOW 3 Operating Instructions Pairing: When the CAM is turned on, quickly press the power button twice and the blue light flashes (about 10S), it is the code pairing mode. At the same time, turn on the display terminal, press the M key to open the menu, find up to enter the code pairing mode, the red light in the upper left corner of the display Flashing, it appears that CAM1 code pairing is successful; The operation of CAM2 is like pressing the menu button to return to the main screen, and pressing the camera button to switch to the paired CAM. After entering the pairing mode, if there is no connection for 10 seconds, it will automatically exit the pairing mode. (Note: One baby terminal can only be connected to one display terminal, and one display terminal can be connected to two baby terminals at the same time; the baby terminal cannot be connected to the adult display terminal Get too close to avoid howling) 4. Use distance Outdoor space: 300M. Indoor: 30M The distance varies according to the material of the wall. 5. Howling The baby end transmits sound to the display end all the time. In order to monitor whether the baby is crying or not, the ambient sound will be amplified and sent to the display end during this work. The display end will always hear this "noise" cycle, and the sound will become louder and louder, and when the adult end is close to the baby end, the speaker will make a sound. It is received by the microphone on the baby side and amplified again, and the sound is sent to the adult side, which forms a howling sound, and only shows that the side should not be close to the baby side.