Name: Electronic Drain Valve Model: 507292 Indicator Lamp: LED indicating power on/off Voltage Range: ±10% Protection Rating: IP65 Insulation Class: H Maximum Working Pressure: 1.6 MPa Maximum Operating Temperature: 90°C Operating Ambient Temperature: -40°C to 60°C Maximum Current Consumption: 4 mA Power Supply Voltage: 24–240V AC/DC, 50/60 Hz Discharge Time (ON): 0.5–10 seconds Time Interval (OFF): 0.5–45 minutes Widely used in separators, dryers, gas tanks, drip legs, and other compressed air system components Used for cleaning compressed air system installations Pay attention to the direction during installation: outlet must not be blocked and should not be exposed to direct air impact Power supply voltage must match the drain valve voltage requirement: when using DC, connect to terminal "1" When wiring the drain valve, connect as follows: brown wire to L (live), blue wire to N (neutral), yellow-green wire to safety ground (GND) Tighten the long screw on the terminal box securely to prevent water ingress Warning: Before installing the electronic drain valve, ensure that: Compressed air has been fully released (system is depressurized) Power supply is disconnected Color: Gold + Black Material: Metal Size: 5 mm Inlet/Outlet Port Size: 1/2 inch Package Contents: 1 x Electronic Drain Valve Note: The package includes only the items listed above; other accessories are not included Note: Lighting and display differences may cause slight color variations between the image and the actual item. Measurement error allowed is ±1–3 cm.