Adjustable 3-Jaw Gear Puller with Internal and External Pulling Approaches, Manual Screw Drive, and Centering Tip for Controlled Positioning

₺2.949,00
ÜCRETSİZ Kargo

Adjustable 3-Jaw Gear Puller with Internal and External Pulling Approaches, Manual Screw Drive, and Centering Tip for Controlled Positioning

Satıcı:

₺2.949,00

Stokta var
ÜCRETSİZ Kargo

14 Günlük İade Politikası

Ödeme yöntemleri:

  • Marka: Unbranded

Ürün detayları

Ürün detayları

Adjustable 3-Jaw Gear Puller with Internal and External Pulling Approaches, Manual Screw Drive, and Centering Tip for Controlled Positioning

Features: Reversible Pulling Setup: Double-ended gripping arms reverse to support internal or external pulling, helping the 3-jaw tool address different gripping positions during component removal. Carbon Steel Construction: The carbon steel puller has a manganese phosphate-treated finish, while the 3-jaw layout positions around the component for a centered manual setup. Configurable Jaw Positioning: Two mounting positions on each linkage change jaw depth and placement, while the threaded center screw provides controlled manual movement around the workpiece. For Common Removal Tasks: Use the puller with bearings, gears, pulleys, and hubs; center the pointed screw tip on the shaft and secure all 3 gripping arms before applying force. Package and Care: Includes 1 3-jaw puller; apply a small amount of grease or oil to the center screw threads and pointed tip before use for smoother threaded movement. Specifications: Component: Carbon steel Claw Arm Structure: Reversible double-ended claws Gripping Mode: External grip / internal pull Drive Mechanism: Manual threaded screw control Finish: Manganese phosphate rust-resistant coating Size: Approx. 20.5 x 8 x 5cm / 8.07 x 3.15 x 1.97inch Quantity: 1 Piece Package Includes: 1 Piece 3-Jaw Puller note: Lubricate Screw Threads: Before use, it is recommended to apply a small amount of grease or engine oil to the center screw thread and tip . Ensuring Centered Alignment: Before applying force, make sure that the center screw tip is accurately aligned with the positioning hole of the removed shaft.
  • Fruugo Kimliği: 559849207-1146092081
  • EAN: 7922042012878
Güvenlik

Ürün Uyumluluk Ayrıntıları

Lütfen aşağıda özetlenen bu ürüne özel uyumluluk bilgilerine bakın.

Aşağıdaki bilgiler bu ürünü satan bağımsız üçüncü taraf perakendeci tarafından sağlanmaktadır.

Üretici:
Aşağıdaki bilgiler, Fruugo tarafında satılan bahsi geçen ürünün üreticisinin irtibat bilgilerini ortaya koymaktadır.

  • Shenzhen Jianming Technology Co., Ltd.
  • Shenzhen Jianming Technology Co., Ltd.
  • 611, 6th Floor, Longsheng Commercial Building, Dalang Street
  • Shenzhen
  • China
  • 518000
  • [email protected]
  • 18818900735

AB sınırları içerisindeki Sorumlu Kişi:
Aşağıdaki bilgiler AB sınırları içerisindeki Sorumlu Kişi’nin irtibat bilgilerini ortaya koymaktadır. Sorumlu kişi AB içerisinde konumlu olan atanmış iktisadi işlemcidir, Avrupa Birliği içerisinde satılan bahsi geçen ürün ile ilgili uygunluk yükümlülüklerinden sorumludur.

  • JUAN SERRANO GONZALEZ
  • JUAN SERRANO GONZALEZ SOCIEDAD LIMITADA
  • C/PABLO IGLESIAS 1-A-ENTRESUELO
  • CASTELLON DE LA PLANA
  • Spain
  • 12006
  • [email protected]
  • +34 964 867178
Teslimat

Teslimat

24 saat içinde kargoya verilir

  • STANDARD: ÜCRETSİZ - Arasında teslimat Cum 04 Aralık 2026–Çar 09 Aralık 2026 - ÜCRETSİZ

Kargo çıkış noktası Çin.

İadeler

İadeler

Sipariş ettiğiniz ürünlerin size bütün ve belirttiğiniz özelliklere göre teslim edilmesi için elimizden gelenin en iyisini yapıyoruz. Fakat, bütün gelmeyen veya siparişiniz ettiğinizden farklı çıkan bir ürünün elinize ulaşması ya da siparişinizden başka bir sebepten ötürü memnun kalmamanız durumunda, siparişi veya siparişe dahil ürünlerden herhangi birini iade edebilir ve ürünler için tam para iadesi alabilirsiniz.

Tam iade politikasını görüntüle