AdBlueOBD2 Emulator for IVECO Trucks EURO 4/5 Adblue OBD2 Plug and Play adBlue/DEF NOx Emulator via OBD2 Plug w

₺6,95
+ ₺907,49 Kargo

AdBlueOBD2 Emulator for IVECO Trucks EURO 4/5 Adblue OBD2 Plug and Play adBlue/DEF NOx Emulator via OBD2 Plug w

  • Marka: Unbranded

AdBlueOBD2 Emulator for IVECO Trucks EURO 4/5 Adblue OBD2 Plug and Play adBlue/DEF NOx Emulator via OBD2 Plug w

  • Marka: Unbranded
Önerilen Perakende Fiyatı: ₺7,95
Fiyat: ₺6,95
Kazancınız: ₺1,00 (12%)
Satıcı:
₺6,95
+ ₺907,49 Kargo

Stokta var

14 Günlük İade Politikası

Biz aşağıdaki ödeme yöntemlerini kabul ediyoruz

Tanım

AdBlueOBD2 Emulator for IVECO Trucks EURO 4/5 Adblue OBD2 Plug and Play adBlue/DEF NOx Emulator via OBD2 Plug w

AdBlueOBD2 for IVECO adBlue or DEF and NOx Emulator via OBD2 Plug and Drive Ready Device! 1.Drive your truck without Diesel Exhaust Fluid! 2.ADBlueOBD2 will override ADBlue system instantly, it will stop the usage of adBlue liquid and disable Nox sensors. 3.Without any power loss of the engine or any warnings on the dashboard and in diagnostic system AdblueOBD2 Emulator for IVECO Trucks Plug and Drive Ready Device by OBD2 Top 5 Reasons to Get AdblueOBD2 Emulator for IVECO Trucks: 1. ADBlueOBD2 is very easy to install. Just Plug it into OBD2 connector of truck or bus and remove the fuses mentioned. 2. ADBlueOBD2 will override ADBlue system instantly, it will stop the usage of adBlue liquid and disable Nox sensors. 3. Without any power loss of the engine or any warnings on the dashboard and in diagnostic system. 4. ADBlueOBD2 does not damage the engine and not cause any negative effects to the truck factory setting. 5. ADBlueOBD2 does not change any of the settings permanently. To turn back to the truck's original settings, just unplug adBlueOBD2 from OBD2 connector. AdblueOBD2 Emulator for IVECO Trucks adBlueOBD2 is a PlugandDrive Ready device to mulate working adBlue systems and NOx sensors on trucks, which equipped with EURO 4 or 5 or 6 catalytic converter systems, even with damaged adBlue SCR system.dBlueOBD2 is easy to install. Installation and Calibration for IVECO Trucks: 1. Pull the Key out from the ignition. 2. Remove the following Fuses (For IVECO) Terminal - 5 Terminal - 15 3. Plug adBlueOBD2 into OBD2 connector 4. Turn on the ignition and check the level of adBlue, if it shows 50 percent or 70 percent . 5. If any fault light appears on dashboard, delete via service scanner. Legal Notice AdBlue or DEF (Diesel Exhaust Fluid) is used to reduce NOx emissions in vehicles. We recommend you to use adBlue or DEF fuel. You can use this device, if you are unable to find a station to fuel up your adBlue or DEF tank. Package including: 1pc x adBlueOBD2 Emulator Box Interface 1pc x User Manuel English Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement.
  • Fruugo Kimliği: 448885528-943948649
  • EAN: 7808222915286

Teslimat ve İade

24 saat içinde kargoya verilir

  • STANDARD: ₺907,49 - Arasında teslimat Cum 26 Aralık 2025–Cum 02 Ocak 2026

Kargo çıkış noktası Çin.

Sipariş ettiğiniz ürünlerin size bütün ve belirttiğiniz özelliklere göre teslim edilmesi için elimizden gelenin en iyisini yapıyoruz. Fakat, bütün gelmeyen veya siparişiniz ettiğinizden farklı çıkan bir ürünün elinize ulaşması ya da siparişinizden başka bir sebepten ötürü memnun kalmamanız durumunda, siparişi veya siparişe dahil ürünlerden herhangi birini iade edebilir ve ürünler için tam para iadesi alabilirsiniz. Tam iade politikasını görüntüle