Adapter for CO2 Refilling with 1.5M Hose and 250Bar Gauge, Compatible with Small Welding Tanks

₺1.649,00
+ ₺709,49 Kargo

Adapter for CO2 Refilling with 1.5M Hose and 250Bar Gauge, Compatible with Small Welding Tanks

  • Marka: Unbranded

Adapter for CO2 Refilling with 1.5M Hose and 250Bar Gauge, Compatible with Small Welding Tanks

  • Marka: Unbranded
Önerilen Perakende Fiyatı: ₺2.849,00
Fiyat: ₺1.649,00
Kazancınız: ₺1.200,00 (42%)
Satıcı:
₺1.649,00
+ ₺709,49 Kargo

Stokta var

Biz aşağıdaki ödeme yöntemlerini kabul ediyoruz

Tanım

Please check your tank thread before placing an order. OD: 22mm W21.8-14 / DIN477 / M22-14 for your large CO2 tank. Commonly used in Russia, Korea, Japan, UK, France, Switzerland, Sweden, Ukraine, Germany, South Africa, Czech Republic, Singapore, etc. This item is used to refill small CO2 tanks from larger tanks, allowing you to conveniently refill small cylinders. CO2 Refilling Station Charging Adapter Type: W21.8-14 How it works: To use correctly, please follow these instructions: 1. Cool the cylinder in the freezer for 1 hour. 2. Screw the CGA320/W21.8 connection to a commercial CO2 gas cylinder. 3. Disconnect the quick connector of the black adapter, then tighten the black adapter to the cylinder (ensure the knob on top of the black adapter is in the highest position; do not turn the adapter knob down to open the cylinder. If the adjusting rod lowers by 6mm and presses the valve pin, the valve will close and CO2 cannot enter). 4. Connect the quick connector. 5. For most large cylinders: turn the large cylinder upside down or lay it down (some main tanks do not have a dip/syphon tube inside). 6. Carefully open the valve of the large gas bottle (the valve on the cylinder closes the flow if opened too much. This occurs if the large cylinder is opened too quickly. The key is to open it slowly. You should hear the airflow for successful filling). 7. After approximately 1520 seconds, the cylinder is fully filled. 8. Close the valve of the large gas bottle. 9. Open the bleed screw to release residual gas. 10. Unscrew the CO2 cylinder filling complete. Color: Black Material: Metal Package Contents: 1 x Charging Valve Connector Note: Only the items listed above are included; other products are not included. Light reflection and different display settings may cause slight variations in the color of the item shown in the picture.
  • Fruugo Kimliği: 415502774-877148263
  • EAN: 5750226080403

Ürün Güvenlik Bilgileri

Lütfen aşağıda özetlenen bu ürüne özel ürün güvenlik bilgilerine bakın.

Aşağıdaki bilgiler bu ürünü satan bağımsız üçüncü taraf perakendeci tarafından sağlanmaktadır.

Ürün Güvenlik Etiketleri

CE Mark
Güvenlik Uyarıları: Please use the product correctly according to the product manual
Üretici Parça Numarası: I500373550
Seri numarası: I500373550

Teslimat ve İade

2 gün içinde kargoya verilir

  • STANDARD: ₺709,49 - Arasında teslimat Çar 29 Ekim 2025–Per 06 Kasım 2025

Kargo çıkış noktası Çin.

Sipariş ettiğiniz ürünlerin size bütün ve belirttiğiniz özelliklere göre teslim edilmesi için elimizden gelenin en iyisini yapıyoruz. Fakat, bütün gelmeyen veya siparişiniz ettiğinizden farklı çıkan bir ürünün elinize ulaşması ya da siparişinizden başka bir sebepten ötürü memnun kalmamanız durumunda, siparişi veya siparişe dahil ürünlerden herhangi birini iade edebilir ve ürünler için tam para iadesi alabilirsiniz. Tam iade politikasını görüntüle

Ürün Uyumluluk Ayrıntıları

Lütfen aşağıda özetlenen bu ürüne özel uyumluluk bilgilerine bakın.

Aşağıdaki bilgiler bu ürünü satan bağımsız üçüncü taraf perakendeci tarafından sağlanmaktadır.

Üretici:
Aşağıdaki bilgiler, Fruugo tarafında satılan bahsi geçen ürünün üreticisinin irtibat bilgilerini ortaya koymaktadır.

  • Hao Zhou
  • Guangzhou Fangni Trading Co., Ltd.
  • No. 110, Fengming Road, Baiyun District
  • Haisheng Logistics Center, Building A, Yangjiang Liancheng
  • Guangzhou
  • CN
  • 510430
  • fadui27557@163.com
  • 15627023449

AB sınırları içerisindeki Sorumlu Kişi:
Aşağıdaki bilgiler AB sınırları içerisindeki Sorumlu Kişi’nin irtibat bilgilerini ortaya koymaktadır. Sorumlu kişi AB içerisinde konumlu olan atanmış iktisadi işlemcidir, Avrupa Birliği içerisinde satılan bahsi geçen ürün ile ilgili uygunluk yükümlülüklerinden sorumludur.

  • Van Lavazza
  • Y & H S.R.L.
  • Via Gravina 21 MT matera,Trani,Puglia
  • Trani
  • Italy
  • 75100
  • itlyhsrl@gmail.com
  • 0039 3917722149