600W DC-DC Boost Converter Step-Up Module Power Supply 12V-60V Input 12V-80V Output Adjustable Voltage Constant CurrentFeatures: High power 600W boost converter module Input voltage selectable: 12-60V or 8-16V (selected via onboard jumper) Wide output voltage range: 12-80V, continuously adjustable Output current adjustable: 0.1-12A High conversion efficiency up to 95% Ultra-low dropout voltage Non-isolated step-up (BOOST) topology Module Specifications: Module Type: Non-isolated DC-DC step-up booster Input Voltage Options: - 8-16V (do not exceed voltage limit to avoid damage) - 12-60V (default setting) Maximum Input Current: 16A (enhance heat dissipation when operating above 10A) Quiescent Current: 15mA (measured at 12V to 20V input; increases slightly with output voltage) Output Voltage Range: 12-80V (continuously adjustable; factory default set to approximately 19V) Maximum Output Current: 12A (enhance cooling when exceeding 10A; current capacity decreases with higher voltage drop) Constant Current Adjustment Range: 0.1-12A Maximum Output Power: Depends on input voltage and load (e.g., 12V × 10A = 120W, 24V × 10A = 240W, up to 60V × 10A = 600W) Multiple modules can be connected in parallel for higher power output (e.g., two modules each set to 8A for a total 15A output) Operating Temperature Range: -40°C to +85°C (improve heat dissipation under high-temperature conditions) Switching Frequency: 150kHz Efficiency: Up to 95% (varies based on input/output voltage, current, and voltage drop) Output Ripple: Approximately 100mV Load Regulation: Approximately 0.2% Line Regulation: Approximately 2% Overcurrent Protection: Yes (automatically reduces output when input exceeds 17A; may vary) Short-Circuit Protection: Yes (20A fuse on input provides dual protection) Reverse Polarity Protection: Not included (external diode recommended if needed) Backflow Prevention: Built-in; no additional diode required for charging applications Mounting: Two 3mm screw holes Wiring: Screw terminals for easy connection without soldering Dimensions: 76mm (L) x 60mm (W) x 56mm (H) including heatsink Net Weight: 205g Applications: DIY adjustable power supply with 12V input and 12-80V adjustable output Power source for electronic devices with customizable voltage output Vehicle power adapter for laptops, PDAs, and other portable electronics Portable laptop power solution using a 12V lithium battery pack Solar panel voltage regulation Battery charging systems High-power LED driver