LCD Display Device for 5/5.5 Inches Size. This display is compatible only with 36V 12A controller or JIPIN controller. Please confirm the controller model before purchasing. Incompatible controllers may result in throttle malfunction. Display wiring instructions (match wire colors during installation): Red: + (power supply voltage) Black: - White: Controller switch control line Blue: RXD signal line Yellow: TXD signal line Green: Acceleration signal line NOTE: Instrument settings for 24V/36V voltage: Press and hold the middle button for 3 seconds to switch modes. Use up and down buttons to increase or decrease gears. Press up and down buttons simultaneously to enter the setting interface. Press the middle button to cycle through settings. Use up and down buttons to adjust parameters. Press up and down buttons together to save settings. Material: Plastic Color: Black The product has a 6-pin connector and is designed exclusively for 6-pin interfaces. Please verify compatibility before ordering. Package Contents: 1 x Scooter Display Note: The package includes only the items listed above. Other accessories are not included. Lighting and screen differences may cause slight color variations between the image and the actual item. Measurement error allowance: +/- 1-3 cm.