The newly developed independent 12 volt 10-way remote control switch with 10 10A relays, each relay has a learning button with the remote control, with 10 single-button remote control or with a 10-key remote control. Each independent work, without disturbing each other, another way to switch work and three work toggle indicator. Red (jog), yellow (self-locking), green (interlock). Mainly used in lighting, LED control, electric doors, windows, lifting equipment, gates, elevators, industrial control and security industries and other fields. Second, the parameters Working voltage: DC12V (can be customized 24V / 36V) Working frequency: 315MHz / 433MHz (optional) Standby current: 12mA Receiving sensitivity: - 110 DBM Work: Jog, self-locking, interlocking (work mode switch button to adjust) Size: 135 * 73 * 18mm Third, the working methods Jog - Press the button to switch the way to the red light Self-locking - Press the button to switch to work yellow to light Interlock - Press the button to switch to work, the green light Fourth, clear the stored information Long press the learning button for about 6 seconds until the working mode indicator light, indicating that the stored information has been successfully cleared. Fifth, learning methods and steps Click the learning button, the indicator light off, let go, press any key on the remote control flash three times after the light, said the success of learning. Remote Control Distance:50-500m( Ideal Distance WITHOUT Any Block and Signal Interfere,Could Rise or Fall 10%-90% in Real Situation ) About Transmitter: 1.Buttons: 10 Buttons 2.Working Voltage: 4.5V 3pcs AAA 3.Operating frequency :433MHz 4.Remote Distance: 100-500M 5.Operating Current: 13 mAh 6.Encode: EV1527 code Note:only have 433MHZ frequency 3.Package Included: A: 1 x Receiver 1 x Transmitters (AAA1.5V battery not included ) B: 1 x Receiver 2 x Transmitters (AAA1.5V battery not included ) C: 1 x Receiver D: 1 x Transmitters (AAA1.5V battery not included )