1. Comply with IEEE 802.3af Power over Ethernet (10/100Mbps Supported). Extender the range of PoE an additional 100 meters 2. Automatically detects and protects PoE equipment from being damaged by incorrect installation. Plug-and Play no configuration required 3. 2 Port PoE extender can forward both Ethernet and PoE power for 1 terminal equipment via Cat5 ,Cat5e,Cat6,Cat6e,UTP cable. 4. 2-Port PoE Extender has 3 10/100M Lan ports, among them, one for power input, the other two for power output. Comply with 10/100BASE-TX,IEEE 802.3 af-PoE. 5. Used with AP, IP camera, IP telephone and the other network equipment in the situation of the lack of power line or far from the power outlets. Installed at hotels, schools, buildings, villages, etc. POE input: 1 RJ45 port POE output: 2 RJ45 port POE Pin Output: 1/2(+), 3/6(-); MAX Power 15W Network Medium: Cat5 or better UTP cables (less than 120m) Repeater Mode: Store and forward Address Table: 2K Packet Buffer Memory: 48 Switching Capacity: 1.0Gbps PoE Standard: IEEE 802.3af Input power: 13 Watts Output power: 12.2 Watts Input voltage: 44-55V 0.5A Output voltage: 44-55V 0.525A Power Supply Type: 1/2+,3/6-,Mode A, End-Span Network Protocol: IEEE 802.3i-10BASE-T, IEEE 802.3u: 100BASE-TX, IEEE 802.3x-Flow Control, IEEE 802.3af-Power over Ethernet; Regulation Compliance: FCC Part 15B, ROHS Directive 2011/65/EU, Low Voltage Directive 2014/35/EU,EMC Directive 2004/108/EC; Working temperature: -10c to 45c Working Humidity: 5%-90%, No Condensation color:Black Material:Plastic + Metal size:88 x 43 x 22mm Package Contents: 3 x 2 Port POE Extender