This panel mount solid state relay offers 4 -32VDC input control, with a switched output rated at 30VDC/ 100Amps. Switching high current DC loads normally requires use of a contactor to avoid arcing as the contacts try to separate. This solid state relay uses MOSFET technology to provide an economical and reliable method of switching medium to high power DC loads. This means there is no arcing and the low on-state resistance provides a viable alternative to the bulky and expensive contactors. Note: Inductive loads must have diode suppression (Refer data sheet wiring diagram) Output Circuit Load Voltage: 0-30VDC Load Current: 0.02-100A Max On-State Resistance: 0.007Ohms Max On-State Voltage Drop: 0.35V Max Turn On Time: 0.5ms Max Turn Off Time: 0.5ms Max Surge Current: 240A (10ms) Input Circuit Control Voltage: 4-32VDC Control Current: 28mA max. Min Turn Off Voltage: 1.0VDC Input Resistance: 1.2kOhm DC Voltage : 3V, 32VDC Current Draw : 28mAMounting Method : ChassisAttachment / Securing Method : Screw DownMount Screw Quantity : 2pcMount Screw Size : 2mmOverall Screw Spacing (H) : 47.5mmDevice Type : Solid State RelayInput : DCContact format : SPSTDC Contact Voltage : 0V, 30VDC Switching Current (Closing) : 0.02A, 100AOperation Time : 0.5msRelease Time : 0.5ms