The PoE Extender features one 30W PoE input port and two 15W PoE output port, running one cable to connect to 2 POE IP devices.The POE extender can extend the range of the Ethernet network by an additional 100m (328 ft). Extended PoE installation range by additional 100M. The maximum is 6 pieces, 700 (2296ft) when deployed in cascade.Supports 10,100Mbps data rates, comply with IEEE802.3at and IEEE802.3af Standard. Provides 802.3af power levels when powered by any 802.3at source.The PoE Extender cost effective installation - does not require local power and other configuration required. Powered via the PoE input, Plug and Play. Automatically detects and protects PoE equipments from being damaged by incorrect installation.It can forward both Ethernet and PoE power for 1 terminal equipment via Cat5,Cat5e,Cat6,Cat6e,UTP cable(less than 120m).PoE input: 1 RJ45 port(DC 48-57V)PoE output: 2 RJ45 portInput power: 30 MaxOutput power: 15.4 MaxNetwork Medium: Cat5 ,Cat5e,Cat6,Cat6e,UTP cable(less than 120m) Distance: up to 700m(6 pieces)Repeater Mode: and forward Address Table: 2KPacket Buffer Memory: 48 Switching Capacity: 400MbpsPoE Standard: IEEE 802.3af/atPoE Cable Core: 1/2(+), 3/6(-)Power Supply Type: Mode A,End-SpanLED Display: PoE Working status, EthernetNetwork Protocol: IEEE 802.3i-10BASE-T, IEEE 802.3u: 100BASE-TX, IEEE 802.3x-Flow Control, IEEE 802.3af-Power over Ethernet.Storage Humidity: 5%~90%, No CondensationColour:blackMaterial:plasticSize:88 x 44 x 22mmPackage Contents:2 * POE ExtenderOnly the above package content, other are not included.Note: Light and different displays may cause the color of the item in the a little different from the real . The measurement allowed is +/- 1-3cm.