12V 6A 72W 6L High-Pressure Diaphragm Pump With Ribbed Design

Features: 1. This diaphragm pump combines the advantages of self-priming pumps and chemical pumps. It must be installed in a dry, well-ventilated location and cannot be operated underwater. 2. Utilizing various imported corrosion-resistant materials, it features self-priming, overheat protection, stable operation, and long-term continuous operation under both no-load and load conditions. 3. Fully sealed design maintains stable pressure. 4. Rubber shock-absorbing pads absorb vibrations during operation. 5. The pump automatically shuts off when the water pressure is too high to prevent bursting, ensuring safe and durable operation. 6. A pressure switch provides pressure protection. 7. Maximum flow rate: 5-6 L/min; Maximum pressure: 7.0 kg; neither is adjustable. 8. Operating modes: Intermittent operation (different working pressures at different times), continuous operation. 9. Applicable media: Water or solvents, pH 5-8, oil. Service life: 500 to 1000+ hours of continuous operation. 10. Pressure switch function: When the water supply is interrupted, the power is automatically cut off, and the motor stops running; when the water supply is restored, the motor automatically starts. 11. The outer casing is made of ABS plastic. 12. The maximum pressure is the factory preset value and cannot be adjusted during use. Specifications: Voltage: 12V DC. (PS: 220V AC (transformer required) Current: 6A Rated Power: 72W Pressure: 7 kg Flow Rate: 6 L/MIN (6.0 liters/minute) Operating Environment: Oil-free, non-corrosive, acid-free, alkali-free, free of liquid solid particles; Ambient Temperature: 0℃-100℃ (both inlet and outlet are acceptable) Dimensions: 10 mm Dimensions: 16.5 × 10 × 6.2 cm Type: Threaded Weight: 600 g (threaded) -Note! To ensure correct use by our customers, we conduct leak tests on each product before shipment. Therefore, the product you receive may have a small amount of water stains or watermarks. We guarantee the product is brand new.)