12V 60W Car Oil Extractor Pump Kit - Efficient and Easy Oil Transfer

Welcome to our shop! This oil extractor transfer pump is an ideal equipment for quick and clean oil-changes. It is widely used in general industrial equipment and works by connecting the clamps to the 12V car-battery. Not only can it pump oil, but it can also pump hydraulic oil and other liquids. Specifications: - Rated Voltage: DC 12V - Rated Power: 60W - Maximum Pressure: Maximum 0.8MPA - Maximum Flow: 5L/min - Pump Diameter: Approx. 4.8cm / 1.89" - Length: Approx. 14.5cm / 5.7" - Outlet Pipe Size(Dia.x L): Approx. 11mm x 140cm / 0.43" x 55" - Inlet Pipe Diameter: Approx. 8mm 6 mm / 0.31" 0.24" - Inlet Pipe Length: Approx. 100cm / 39.37" - Cable Length: Approx. 30cm / 11.8" - Clips Length: Approx. 8cm / 3.15" - Main Color: Black Application: - Widely used in general industrial equipment, chemical equipment, shipbuilding, drinks, carpet and floor cleaning, water purification and water treatment equipment, vehicle cleaning, agricultural spraying, zo pipeline pressure, air cleaning cooling, coal and metallurgical industries How to use: 1. Start the car engine and let it run for a while until the oil temperature is around 50 degrees. 2. Connect the pump to the power source and run it for a while to check if the inlet and outlet are working properly. 3. Open the filler cap and insert the tube into the bottom of the joint until it doesn't move. Then insert the inlet pipe from the oil dipstick into the end. If there is no oil or the pumping is slow or intermittent, it may be due to loose pipes and fittings. Please reinstall them. 4. After pumping the oil, remove the tube and run the pump for a while to pump the remaining oil inside. You can also pump water to clean the pump head. 5. If the pump has no suction after not being used for a long time, pour water into the pump and run it for a few minutes until all the air is out. Package Included: - 1 x oil pump - 1 x 11mm outlet pipe - 1 x 8mm inlet pipe - 1 x 6mm inlet pipe - 2 x clips 100% Satisfaction: Our customers are our top priority. If you find any product problems after receiving the goods, such as damage and incorrect quantity of goods, please contact the seller immediately. We try our best to provide you with satisfactory after-sales service.