0-25mm Metric Micrometer Carbon Steel Outside Micro-Meters Precise Tools Micro-Meter Gauge Meter Ac

₺499,00
+ ₺214,49 Kargo

0-25mm Metric Micrometer Carbon Steel Outside Micro-Meters Precise Tools Micro-Meter Gauge Meter Ac

  • Marka: Unbranded

0-25mm Metric Micrometer Carbon Steel Outside Micro-Meters Precise Tools Micro-Meter Gauge Meter Ac

  • Marka: Unbranded
Önerilen Perakende Fiyatı: ₺624,00
Fiyat: ₺499,00
Kazancınız: ₺125,00 (20%)
Satıcı:
₺499,00
+ ₺214,49 Kargo

Stokta var

Biz aşağıdaki ödeme yöntemlerini kabul ediyoruz

Tanım

Outer diameter micro-meter the external dimensions measuring instruments, measure the distance between the two sides of the square frame by use of helix principle. Outer diameter micro-meter is mainly used for measuring a variety of external dimensions. Diameter micro-meter dividing value is 0.01mm, the upper limit of measurement range is not more than 300mm, divided into a 25mm per specification. Such as 0-25mm, 25-50mm ...... and so on. Measuring range: 0-25 Resolution: 0.001 Instructions for use: 1. Clean the measuring before use and correct the zero position. 0-25mm direct alignment zero: 25mm above use the bar gauge aimed at quasi-zero. 2. Zero correction : If the 0-bit line is not aligned with the , first loose screw with a screwdriver slightly, with a wrench to adjust the position, so that the alignment 0 taste bit line, then tighten the screws. (See instructions for use picture 2) 3. When measuring, the micro-meter should be perpendicular to the work piece under test, rotating force measuring device, the measuring in contact with the work piece should be rotating gently, when the force measuring device issued a slight "click, click ..."sound, That is the actual size of the work piece under test. 4. Locking device can be passive measurement of micro-screw back and forth. Relax to the right and lock to the left. 5. When measuring, the left hand should hold the heat shield to prevent body temperature transmitted to the micro-meter, causing measurement error. 6. One end of the wrench can be adjusted zero, the other end can pull the force measuring device. Colour:As Shown Material:carbon steel Package Contents: 1 x Outside Micro-meter 1 x Accessory Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
  • Fruugo Kimliği: 324879198-719805710
  • EAN: 4714151140879

Teslimat ve İade

3 gün içinde kargoya verilir

  • STANDARD: ₺214,49 - Arasında teslimat Pzt 20 Ekim 2025–Çar 29 Ekim 2025

Kargo çıkış noktası Çin.

Sipariş ettiğiniz ürünlerin size bütün ve belirttiğiniz özelliklere göre teslim edilmesi için elimizden gelenin en iyisini yapıyoruz. Fakat, bütün gelmeyen veya siparişiniz ettiğinizden farklı çıkan bir ürünün elinize ulaşması ya da siparişinizden başka bir sebepten ötürü memnun kalmamanız durumunda, siparişi veya siparişe dahil ürünlerden herhangi birini iade edebilir ve ürünler için tam para iadesi alabilirsiniz. Tam iade politikasını görüntüle

Ürün Uyumluluk Ayrıntıları

Lütfen aşağıda özetlenen bu ürüne özel uyumluluk bilgilerine bakın.

Aşağıdaki bilgiler bu ürünü satan bağımsız üçüncü taraf perakendeci tarafından sağlanmaktadır.

Üretici:
Aşağıdaki bilgiler, Fruugo tarafında satılan bahsi geçen ürünün üreticisinin irtibat bilgilerini ortaya koymaktadır.

  • Hpcl Factory
  • hui zhou shi tang tang ke ji you xian gong si
  • Cheng Qu San Dong Zhen Zhu Yuan Lu 8 hao
  • Zhong Zhou Tian Yu Hua Yuan Di 10 dong 27 ceng 01 hao Fang
  • Hui Zhou
  • China
  • 516000
  • qingmingdo@outlook.com
  • 15363471640

AB sınırları içerisindeki Sorumlu Kişi:
Aşağıdaki bilgiler AB sınırları içerisindeki Sorumlu Kişi’nin irtibat bilgilerini ortaya koymaktadır. Sorumlu kişi AB içerisinde konumlu olan atanmış iktisadi işlemcidir, Avrupa Birliği içerisinde satılan bahsi geçen ürün ile ilgili uygunluk yükümlülüklerinden sorumludur.

  • 0utong GmbH
  • 0utong GmbH
  • Brehmstr 56 40239 Duesseldorf
  • Brehmstr
  • Germany
  • 40239
  • info@outong.de
  • 4921131054698