Dash Cam OBD Hardwire Kit, Dash Camera USB Type C Hardwire Kit with OBD Power Cable for Dashcam [24-hour parking/ACC mode switch] "MODE -": activates the dash camera's parking mode for 24-hour monitoring. Power will be cut off if the voltage drops below 11.6V. "MODE O": activates ACC mode, providing power only when the engine is running. [Universal Dash Cam OBD Hardwire Kit] This OBD dash cam hardwire power cable kit is compatible with most dash cams, GPS devices, and radar detectors available on the market. Note: This product is not suitable for electric vehicles. [Simple plug-in installation] Plug and play design does not damage the cars circuit. Simply connect to the vehicles OBD port and use the USB output to power your device. Draws power only without interfering with vehicle data communication. [Low Voltage Protection] Equipped with an intelligent control chip that monitors battery voltage and provides low voltage protection. Automatically cuts off power when battery voltage falls below 11.6V to ensure the vehicle can start normally. [Clean and Space Saving] Helps hide wiring for a clean, wire-free appearance inside the vehicle. Frees up the cars 12V socket for charging other devices while maintaining a tidy interior. Material: Plastic Color: Black Package Contents: 1 x Vehicle Cable Note: Light reflection and differences in display screens may cause slight variations between the color shown in the image and the actual product. Measurement may vary by +/- 1-3 cm.