With the popularity of USB3.0, USB3.0 TO SATA3.0 extension cable uses USB3.0 high-speed transmission, compatible with 2.0 interface, you can directly access the SATA interface 2.5-inch notebook hard drive, so that your laptop hard drive will immediately become High-speed USB3.0 mobile hard disk Built in 2 SATA3.0 interfaces, Supports SATA Rev 3.0 transfer speeds up to 6.0Gbps and backwards compatible with SATA I/II at 1.5/3.0Gbps System disk and PCIE to SATA3.0 adapter card connection conditions and solutions: 1, PCIE to SATA3.0 SATA interface mode is AHCI mode, if you want to insert the system disk in our card, the premise is that your system disk installed on the motherboard must be AHCI mode installation, otherwise it can not pass Our card adapter card boot system. 2. If it is determined that the system disk is inserted in the AHCI mode of the SATA interface mounting system on the mainboard, then the hard disk can be directly inserted into our card, and then the mainboard BIOS is set to start the system disk as the first boot. 3, the above two conditions are available, if you still can not start, or repeatedly restart, then the motherboard hard drive interface and our adapter card conflict, the solution is to enter the motherboard BIOS, the motherboard's hard disk interface options set to Disabled, save and restart to boot the system material: metal Colour: Black Support Interface: USB3.0 TO SATA 22PIN Support System: WinXP/Vista/Win7/Win8 32-bit/64-bit LINUX Meets Serial ATA 3.0 specification, backward compatible with SATA2.0 SATA1.0 Compliant with PCI-Express v2.0 specification, backward compatible with PCI-Express v1.0. Supports communication speeds of 6.0 Gbps, 3.0 Gbps, and 1.5 Gbps Support Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x, and Gen 3i. Supports two SATA Support AHCI1.0 mode and IDE mode Support native command queue (NCQ) Supports based on port multiplier switches or command switches. Hot-swappable and hot-swappable. Compatible with SATA6G, 3G and 1.5G Hard Drives Bus interface PCI-Express x1 slot Extension ports 2 SATA3.0 interfaces System Requirements One available PCI Express X1 slot, supporting PCI-E X2 X4 X8 X16 Operating System: Windows 10/8/7 (32/64 bit) / Vista (32/64 bit) / XP/2003/2008/linux Attention: Don't Support as System Disk Boot, only used as extension. Package Contents: 1 x expansion card Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.