TFT LCD Screen for Samsung Galaxy S10+ SM-G975 Digitizer Full Assembly with Frame, Not Supporting Fingerprint Identification Before Installation Notes Tip 1: Test before installation When testing, do not remove any protective film or tags. Pay attention to static electricity. Before attempting any repair, ground yourself using an ESD (electrostatic discharge) strap to prevent static electricity from damaging the electronic components within the phone. Wear eye protection and use caution to avoid cuts from glass splinters. Tip 2: Simulate testing Screen replacement is a fragile product. It is strongly recommended to test before installation. Simulate testing by disassembling the phone, connecting the motherboard, LCD or screen, audio cable, and the new replacement, then powering on to test. If the test is successful, proceed with installation. If there is no display, immediately. Do not force installation. No responsibility will be taken once the screen is installed. Tip 3: Do not over-bend cable Ensure the LCD cable is not bent beyond 90 degrees, as excessive bending may cause black display. About the Product 1. Replacement LCD screen and touch screen digitizer assembly with frame for Samsung Galaxy S10+ SM-G975 2. Replaces old, broken, cracked, or damaged screens 3. Restores device appearance 4. Full compatibility and functionality 5. Each item is inspected and in good condition before shipping 6. Professional installation is highly recommended. No responsibility will be taken after installation 7. Note: Does not support fingerprint identification