Soft and Bright Lights: 12 LEDs provide bright light to help you never stumble in the dark. 3 modes (Auto / ON / OFF): This LED night light will turn on in the dark when you approach within 3 meters and turn off 30 seconds after your absence. It is also possible to always turn it off or keep it always on, depending on your needs. Best solution for non-grip areas: With the supplied magnet and 3M tape, no screws, nuts or tools are required. You can stick it anywhere or easily absorb it on any metal surface, also can be used as a flashlight. Rechargeable by USB: never waste money on batteries again Built-in 500mAh lithium battery, the light lasts 2 months in automatic mode; Rechargeable via micro USB cable (included), compatible with power bank, PC USB port, phone charger. Very simple and practical. Wide use: LED lights are suitable for cabinet stairs, drawers, base cabinets, pantries, bedrooms, wardrobes, workshops, bookcases, attics, closets, basements, hallways, headboards, etc. Enjoy a friendly 24-month warranty and easy-to-access support. Product information LED night light with motion detector Use of PIR technology: When the lamp is arranged horizontally, the vertical detection area is larger than the horizontal detection area and is separately 120 and 50 , the detection angle is opposite when the lamp is placed vertically. Specifications: Detection area: 10 feet Angle of movement: 120 / 50 Brightness: 160lm LED lifespan: about 80000h Motion sensing night light provides soft, warm and bright light so you can orient yourself at night. Rechargeable by USB: Rechargeable via USB cable (included), compatible with all USB charging ports such as power bank, PC USB port, phone charger. Very simple and practical. Installation advice: Please place the light horizontally when the light installed in this place goes up and down like a staircase. If the light is installed where you always go left and right, such as hallway, bedroom, dressing room, etc., please place it vertically. NOTE: In AUTO mode, the lighting cannot be turned on in daylight or in a bright environment. Do not try to mount 2 auto sensor lights so close. You can interact with each other in AUTO mode.